There are various types of materials that you can use as the foundation of your building and house. For thousands of years, concrete has been utilized in a variety of buildings all throughout the world. Fresh concrete has a wide range of applications and may be cast into circles, rectangles, squares, and other shapes. It may also be used to make stairwells, columns, doorways, beams, lentils, and other common constructions. Concrete is produced in three grades: regular, standard, and high-strength, which show how strong the concrete is and how it will be utilized in building.
These are 4 types of building systems that you can apply on your buildings:
On – site poured concrete system
This is the type of concrete that is commonly used for houses. This material is poured pre-prepared formwork consisting of plywood and reinforced steel. Steel reinforcement and insulation are installed into wood or aluminium wall shapes. The concrete is then poured into these moulds, which are subsequently removed once the concrete has set. The same procedure is used for the flooring and the ceiling. After the formwork has been removed, the concrete may be textured or patterned for aesthetic purpose. This concrete building method is ideal for homes in high wind locations since concrete is one of the finest materials for protecting buildings from hurricanes and storms.
There are two types of panel system which are tilt-up panel system and precast panel system. Both panel systems are ideal for flat and open modern house designs.
Tilt-up panel systems operate similarly to precast panel systems, which one wall panel cast on-site and the other off-site. This technique needs a significant amount of open space in order to tilt the concrete walls into position. Once the walls are safely in place, they are linked to the remainder of the home.
Meanwhile, precast panel systems are when the exterior walls of a home are created off-site at the concrete plant. The metal electric wiring and reinforcement are added once the foam insulation has been put into the holes. Cranes are used to raise the precast panels to the site and install them to the foundation of the home.
Concrete blocks provide excellent insulation in a variety of applications, from blending them into pre-moulded cement to filling open cavity walls with block inserts. These concrete blocks not only provide optimum insulation, but they also detect heat flow by limiting air leakage. Concrete blocks are a classic building method that is frequently employed in concrete building systems, particularly in hurricane-prone locations where the blocks provide optimum storm protection. For best outcomes, new concrete blocks have enhanced insulation and sophisticated construction processes.
Insulated concrete system
This method is ideal for homes in colder regions because it provides optimal insulation through the use of exterior and inner layers. The insulated concrete system employs permanent formwork rather than detachable formwork into which concrete is poured. It is made up of up to two polystyrene sheets that are connected at regular intervals. This concrete building system is one of the quickest ways to construct walls and floors.
Apart from paying attention to the building system, knowing that your cement wall contains polycarboxylate from Malaysia is also a good thing to make sure your walls are at their best condition.